Constants for HTTP Status Code

WebRainbow Version 1.5 exposes 40 Constants for HTTP Status Code to Visual Basic:

  1. sc100_Continue
  2. sc101_SwitchingProtocols
  3. sc200_OK
  4. sc201_Created
  5. sc202_Accepted
  6. sc203_NonAuthoritativeInformation
  7. sc204_NoContent
  8. sc205_ResetContent
  9. sc206_Partial_Content
  10. sc300_MultipleChoices
  11. sc301_MovedPermanently
  12. sc302_Found
  13. sc302_MovedTemporarily
  14. sc303_SeeOther
  15. sc304_NotModified
  16. sc305_UseProxy
  17. sc307_TemporaryRedirect
  18. sc400_BadRequest
  19. sc401_Unauthorized
  20. sc402_PaymentRequired
  21. sc403_Forbidden
  22. sc404_NotFound
  23. sc405_MethodNotAllowed
  24. sc406_NotAcceptable
  25. sc407_ProxyAuthenticationRequired
  26. sc408_RequestTimeOut
  27. sc409_Conflict
  28. sc410_Gone
  29. sc411_LengthRequired
  30. sc412_PreconditionFailed
  31. sc413_RequestEntityTooLarge
  32. sc414_RequestUriTooLarge
  33. sc415_UnsupportedMediaType
  34. sc416_RequestedRangeNotSatisfiable
  35. sc417_ExpectationFailed
  36. sc500_InternalServerError
  37. sc501_NotImplemented
  38. sc502_BadGateway
  39. sc503_ServiceUnavailable
  40. sc504_GatewayTimeOut
  41. sc505_HttpVersionNotSupported

  1. sc100_Continue

    2. HTTP Status-Code and Reason-Phrase: 100 Continue. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc100_Continue = "100"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  2. sc101_SwitchingProtocols

    3. HTTP Status-Code and Reason-Phrase: 101 Switching Protocols. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc101_SwitchingProtocols = "101"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  3. sc200_OK

    4. HTTP Status-Code and Reason-Phrase: 200 OK. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc200_OK = "200"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  4. sc201_Created

    5. HTTP Status-Code and Reason-Phrase: 201 Created. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc201_Created = "201"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  5. sc202_Accepted

    6. HTTP Status-Code and Reason-Phrase: 202 Accepted. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc202_Accepted = "202"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  6. sc203_NonAuthoritativeInformation

    7. HTTP Status-Code and Reason-Phrase: 203 Non-Authoritative Information. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc203_NonAuthoritativeInformation = "203"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  7. sc204_NoContent

    8. HTTP Status-Code and Reason-Phrase: 204 No Content. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc204_NoContent = "204"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  8. sc205_ResetContent

    9. HTTP Status-Code and Reason-Phrase: 205 Reset Content. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc205_ResetContent = "205"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  9. sc206_Partial_Content

    10. HTTP Status-Code and Reason-Phrase: 206 Partial Content. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc206_Partial_Content = "206"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  10. sc300_MultipleChoices

    11. HTTP Status-Code and Reason-Phrase: 300 Multiple Choices. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc300_MultipleChoices = "300"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  11. sc301_MovedPermanently

    12. HTTP Status-Code and Reason-Phrase: 301 Moved Permanently. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc301_MovedPermanently = "301"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  12. sc302_Found

    13. HTTP Status-Code and Reason-Phrase: 302 Found. Only available for new version of HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc302_Found = "302"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  13. sc302_MovedTemporarily

    14. HTTP Status-Code and Reason-Phrase: 302 Moved Temporarily. Available for HTTP 1.0 & old version of HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc302_MovedTemporarily = "3020"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  14. sc303_SeeOther

    15. HTTP Status-Code and Reason-Phrase: 303 See Other. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc303_SeeOther = "303"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  15. sc304_NotModified

    16. HTTP Status-Code and Reason-Phrase: 304 Not Modified. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc304_NotModified = "304"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  16. sc305_UseProxy

    17. HTTP Status-Code and Reason-Phrase: 305 Use Proxy. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc305_UseProxy = "305"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  17. sc307_TemporaryRedirect

    18. HTTP Status-Code and Reason-Phrase: 307 Temporary Redirect. Only available for new version of HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc307_TemporaryRedirect = "307"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  18. sc400_BadRequest

    19. HTTP Status-Code and Reason-Phrase: 400 Bad Request. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc400_BadRequest = "400"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  19. sc401_Unauthorized

    20. HTTP Status-Code and Reason-Phrase: 401 Unauthorized. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc401_Unauthorized = "401"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  20. sc402_PaymentRequired

    21. HTTP Status-Code and Reason-Phrase: 402 Payment Required. Not available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc402_PaymentRequired = "402"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  21. sc403_Forbidden

    22. HTTP Status-Code and Reason-Phrase: 403 Forbidden. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc403_Forbidden = "403"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  22. sc404_NotFound

    23. HTTP Status-Code and Reason-Phrase: 404 Not Found. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc404_NotFound = "404"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  23. sc405_MethodNotAllowed

    24. HTTP Status-Code and Reason-Phrase: 405 Method Not Allowed. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc405_MethodNotAllowed = "405"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  24. sc406_NotAcceptable

    25. HTTP Status-Code and Reason-Phrase: 406 Not Acceptable. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc406_NotAcceptable = "406"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  25. sc407_ProxyAuthenticationRequired

    26. HTTP Status-Code and Reason-Phrase: 407 Proxy Authentication Required. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc407_ProxyAuthenticationRequired = "407"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  26. sc408_RequestTimeOut

    27. HTTP Status-Code and Reason-Phrase: 408 Request Time-out. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc408_RequestTimeOut = "408"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  27. sc409_Conflict

    28. HTTP Status-Code and Reason-Phrase: 409 Conflict. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc409_Conflict = "409"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  28. sc410_Gone

    29. HTTP Status-Code and Reason-Phrase: 410 Gone. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc410_Gone = "410"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  29. sc411_LengthRequired

    30. HTTP Status-Code and Reason-Phrase: 411 Length Required. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc411_LengthRequired = "411"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  30. sc412_PreconditionFailed

    31. HTTP Status-Code and Reason-Phrase: 412 Precondition Failed. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc412_PreconditionFailed = "412"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  31. sc413_RequestEntityTooLarge

    32. HTTP Status-Code and Reason-Phrase: 413 Request Entity Too Large. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc413_RequestEntityTooLarge = "413"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  32. sc414_RequestUriTooLarge

    33. HTTP Status-Code and Reason-Phrase: 414 Request-URI Too Large. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc414_RequestUriTooLarge = "414"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  33. sc415_UnsupportedMediaType

    34. HTTP Status-Code and Reason-Phrase: 415 Unsupported Media Type. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc415_UnsupportedMediaType = "415"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  34. sc416_RequestedRangeNotSatisfiable

    35. HTTP Status-Code and Reason-Phrase: 416 Requested range not satisfiable. Only available for new version of HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc416_RequestedRangeNotSatisfiable = "416"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  35. sc417_ExpectationFailed

    36. HTTP Status-Code and Reason-Phrase: 417 Expectation Failed. Only available for new version of HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc417_ExpectationFailed = "417"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  36. sc500_InternalServerError

    37. HTTP Status-Code and Reason-Phrase: 500 Internal Server Error. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc500_InternalServerError = "500"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  37. sc501_NotImplemented

    38. HTTP Status-Code and Reason-Phrase: 501 Not Implemented. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc501_NotImplemented = "501"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  38. sc502_BadGateway

    39. HTTP Status-Code and Reason-Phrase: 502 Bad Gateway. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc502_BadGateway = "502"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  39. sc503_ServiceUnavailable

    40. HTTP Status-Code and Reason-Phrase: 503 Service Unavailable. Available for HTTP 1.0 & HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc503_ServiceUnavailable = "503"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  40. sc504_GatewayTimeOut

    41. HTTP Status-Code and Reason-Phrase: 504 Gateway Time-out. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc504_GatewayTimeOut = "504"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

  41. sc505_HttpVersionNotSupported

    42. HTTP Status-Code and Reason-Phrase: 505 HTTP Version not supported. Only available for HTTP 1.1

    Member of WRHttpHeaderStatus.StatusCode

    Definition
    Const sc505_HttpVersionNotSupported = "505"

    Remarks
    This constant can be used for Redirect and SetCgiHeader

For the latest information on WebRainbow, please see:
http://www.dmfsys.com/wrainbow/

For questions / comments please email to:
support@dmfsys.com

Copyright © 2000 - 2005 D.M.F. Systems, Corporation. All rights reserved.

Last modified on March 2, 2005